Background Video Recorder Ultimate

Best Practice

1. Best Practices. Why?

Android system is working very hard to optimize the battery & the CPU.
This is why background apps are being closed by the system.
We can, ,however, try to be closed last.
This role is correct to all other BVR application out there.

2. Best Practices. How to start recording while screen is closed?

Choose Vibration on start recording.
choose to split the video recording every 10 min.
make sure "Limit recording Time" is unselected and so unlimited.
run the application from the oneClick Icon
Press the volume up to start recording.
When important moment appear - press the volume up again.
* If recording is in session, it will restart recording.
* If the recording stopped - it will start recording.
* If the service is down - no vibration and so you can reopen the service.

Make sure you give all permissions needed from the permission wizard. follow the next step (number 3).

3. BVR Ultimate shuts down after a while?


Android operational system closes application to save battery after a while.
From the Settings activate the pemission wizard,
on the 3rd step you will be navigated to battery optimization panel.
choose "All" to show all application in the list and then uncheck BVR Ultimate
Pay attention that recording is stopped by Android after it reaches 4GB, to solve it, check "How to number 7"

4. In the first second video & audio vibrates


The "Vibrate when start recording" makes sound and vibrate the camera.
It looks like a small earth quake. picture will vibrate and the audio will record strong vibes
Best practice if you want to avoid this sound is to cancel all vibrations
If you want to avoid also notification sound:
In the settings, make sure "Mute recording Chime" is checked.
When you select it in the first time it will redirect you to "Do not disturb" panel
Scroll for "BVR Ultimate" and select it from the list.

5. Backup your videos?


When you ask to delete video files, Our app will re-confirm with you the deletion.
After it the files will be permenantly deleted
Best Practice?
Select sharing and as a destination choose : Google drive or Google Images.
Because this happens allot to users, We have tested the following:
Without any liability or responsibility from our side:
We have found this software after a short googling, it is free to use for the trial time:
Link to Dr. fone
explaination video:

We do not have any contact or prior knowledge of this app but it could be a solution for your problem.

6. Recommended Video bitrate when using 30 FPS:


Full HD (1920x1080): 10Mbps
4K (2840x2160): 48M~50Mbps
8K (7680 × 4320): ~100Mbps
Recommended Bitrate and other settings

7. Specific Battery Optimizations for each device


If a recording does not start at its designated time, BVR Ultimate may have been force stopped by another app or system setting designed to preserve your device's memory or battery.

Refer to the following sections for instructions to prevent BVR Ultimate from being force stopped:

Other installed apps

If another app is force stopping BVR Ultimate, add BVR Ultimate to the list of allowed or whitelisted apps for the related app. If you are unsure which of your installed apps force stopped BVR Ultimate, check any apps that are intended to improve the performance of your device by preserving battery or memory.

NOTE: The exact way to manage these settings varies depending on the app.

Try also our Running app tutorial

Device settings

To prevent BVR Ultimate from being force stopped by your device, enable BVR Ultimate in your device settings related to battery or memory management. Device settings vary depending on your device type. For detailed instructions, select your device type from the list below:

NOTE: If your device type is not listed, refer to your device's online support pages for more information.

Asus

Follow these steps on your Asus device:

  1. Open your device Settings.
  2. Tap Power management, then tap Auto-start Manager.
  3. On the Downloaded tab, tap Deny next to BVR Ultimate to change this setting to Allow.
  4. Tap Allow to confirm the setting change.

Huawei

Follow the relevant steps below, depending on your on your Huawei device:

Huawei (EMUI 10.0 and later)

  1. Open your device Settings, then go to BatteryApp Launch.
  2. Tap the slider next to BVR Ultimate so it turns Off.
  3. In the dialog that appears, ensure Auto launch and Run in background are enabled.

Huawei (EMUI 5.0 - 9.1)

  1. Tap the Phone Manager icon on the main screen of your device (or open SettingsBattery).
  2. Tap Lock screen cleanup.
  3. Ensure the slider next to BVR Ultimate is gray (OFF) and the app is set to Don't close.

Huawei (EMUI 4.9 and earlier)

  1. Tap the Phone Manager icon on the main screen of your device.
  2. Go to Settings and select the Protected apps tab.
  3. Turn on the protection for BVR Ultimate.

Lenovo / Lenovo Zuk

Follow steps in either option (A), (B), or (C) below, depending what matches your device navigation:

  • Option (A):
    1. Open your device Settings.
    2. Select Background app management.
    3. Deselect BVR Ultimate.
  • Option (B):
    1. Open your device Settings and select Apps.
    2. Choose BVR Ultimate, then tap Battery.
    3. Disable Battery optimization.
  • Option (C):
    1. Open Advanced Settings and select Battery.
    2. Tap Battery Optimization.
    3. Tap BVR Ultimate and select Off.

Nokia

Follow these steps on your Nokia device:

  1. Open your device's System settings.
  2. Tap AppsBVR Ultimate.
  3. Tap Battery and select Don't optimize.

Further recommendations

If you continue to experience issues, ensure that Battery Saver is not enabled:

  1. Open your device's System settings and select Battery.
  2. Ensure Battery Saver is disabled.

OnePlus

Follow these steps on your OnePlus device:

  1. Go to System SettingsApps, and tap the gear icon. Choose Special AccessBattery Optimization and disable this feature.
  2. Go to Phone SettingsBatteryBattery Optimization. Choose All apps in the menu at the top of the screen, then tap BVR Ultimate and select Don't optimize.

On older OnePlus devices, follow the alternative steps below:

  1. Open your device Settings and select BatteryBattery optimization.
  2. Tap Menu (three dots), then disable Enhanced optimization (or Advanced optimization).

Further recommendations

Certain OnePlus devices include the App Auto-Launch feature, which prevents apps from running in the background. To disable this feature:

  1. Open System Settings on your OnePlus device and go to AppsApp auto-launch.
  2. Tap the slider next to BVR Ultimate so that it turns gray (OFF).

Samsung

Follow the relevant steps below according to your Android version:

Samsung (Android 10)

  1. Open your device Settings and tap Device care.
  2. Tap Battery, then select App power management.
  3. Tap Apps that won't be put to sleep, then select BVR Ultimate.
  4. Tap Done to confirm.

Samsung (Android 9)

  1. Open your device Settings and tap Apps.
  2. Tap Menu (three dots) in the top-right corner, then select Special access.
  3. Select Optimise battery usage, then tap the drop-down menu at the top of the screen and select All.
  4. Tap the blue (ON) slider next to BVR Ultimate so it turns white (OFF).

Samsung (Android 6, 7, or 8)

  1. Open your device Settings and tap Device maintenance.
  2. Tap Battery, then scroll down and select Unmonitored apps.
  3. Tap Add apps, then select BVR Ultimate. Tap Done to confirm.

Xiaomi

Follow the relevant steps below according to your MIUI version:

MIUI 11

  1. Open your device Settings and go to AppsManage apps.
  2. Tap BVR Ultimate.
  3. Ensure that Autostart is enabled.
  4. Tap Other permissions and ensure the following permissions are enabled:
    • Show on lock screen
    • Display pop-up window
    • Display pop-up windows while running in the background
  5. Tap the back arrow, then tap Battery Saver and select No restrictions.

MIUI 9 or 10

  1. Open either your device Settings, Installed apps, or App Management.
  2. Tap BVR Ultimate and ensure Autostart is enabled.
  3. Tap Other permissions.
  4. Ensure Show on lock screen and Start in background are enabled.
  5. Tap the back arrow, then tap Battery Saver and select No restrictions.

MIUI 8

  1. Open either your device Settings, Installed apps, or App Management.
  2. Tap BVR UltimateOther permissions.
  3. Ensure Show on lock screen and Start in background are enabled.
  4. Return to your main device Settings screen.
  5. Select BatteryManage apps battery usage.
  6. Tap Choose appsBVR UltimateNo restrictions.

Further recommendations

If you continue to experience issues on Xiaomi (MIUI 10), try the relevant troubleshooting steps below from the device Settings screen:

  • Go to Advanced SettingsBattery manager. Ensure the Power plan is set to Performance.
  • Go to Advanced SettingsBattery managerProtected apps. Ensure BVR Ultimate is set to Protected.
  • Go to AppsBVR UltimateBattery. Enable Power-intensive prompt and Keep running after screen off.
  • Go to Additional SettingsBattery & PerformanceManage apps battery usage, then perform the following actions:
    1. Ensure all options under Power Saving Modes are set to Off.
    2. Tap Saving Power In The BackgroundChoose appsBVR UltimateBackground Settings. Select No restrictions.

Sony Xperia

Follow these steps on your Xperia device:

  1. Open your device Settings and tap Battery.
  2. Tap Menu (three dots) in the top-right corner, then select Battery optimization or Power saving exceptions.
  3. Tap the Apps tab and tick BVR Ultimate.

8. Users Tips:


    Thanks hosein: How to reduce file size :
    If you want to reduce the volume of your movie. Go to settings:Camera2:Video Bitrate set its value not to the default but to a value that you find fit, for example, I set it to 6 MB or 5 MB mode. It takes up to 1 GB per hour, but the quality is also very good. The default is half an hour. It can hold between 3 to 6 gigs.